MLA-30 Loop Antenna Active Receiving Antenna 100kHz-30MHz for Short Wave Radio

MLA-30 Loop Antenna Active Receiving Antenna 100kHz-30MHz for Short Wave Radio
MLA-30 Loop Antenna Active Receiving Antenna 100kHz-30MHz for Short Wave RadioMLA-30 Loop Antenna Active Receiving Antenna 100kHz-30MHz for Short Wave RadioMLA-30 Loop Antenna Active Receiving Antenna 100kHz-30MHz for Short Wave Radio



Description:
  The MLA-30 loop antenna is a popular broadband antenna. It is an effective antenna for short-wave listeners (SWL) and amateur radio enthusiasts (HAM) to receive medium-wave and short-wave in the limited living area of the city. Frequency coverage: 100kHz to 30 MHz. Excellent directionality can help you reduce noise and improve signal-to-noise ratio, and can dig out weak signals that are overwhelmed by noise when conventional antennas are received.
  The MLA-30 loop antenna is easy to install and can be easily installed on balconies, rooftops, and other small, compact, low-profile installations without worrying about neighbors and property opposition.
  Another advantage of the MLA-30 loop antenna is that it is directional. By rotating the antenna so that the dummy point of the antenna is aligned with the interfering signal, the specific near-field interference can be minimized.

Specifications:
Type: MLA-30 Toroidal Magnetic Antenna
Main Coverage: 100kHz to 30 MHz

Features:
- No manual adjustment required.
- Rainproof enclosure for long-term fixed outdoor use.
- Stainless steel ring vibrator, easy to install and easy to maintain.
- Local radiation noise suppression up to 30 dB compared to long-haul antennas.
- 8-shaped patterning provides deep dummy points to further reduce interference.
- USB power supply, convenient to take power. Self-contained feeders simplify the installation process.
- Simple structure, easy to install to the balcony, rooftop and other locations.
- Install low-key, no need to worry about neighbors and properties.
- Modular design, easy to install and maintain.

Tips:
1. Do not connect it to the transmitter as it will cause the preamplifier to be damaged.
2. Need to prepare a PVC sheath tube for support, any diameter, need to pay attention to the need to have a certain strength, any community hardware store can buy. You can also use existing bamboo poles, wood poles, etc., and be careful not to use metal rods.

Package Included:
1X MLA-30 Amplifier  with 10M cable
1X Stainless steel vibrator
1X Bias supply 
1X 0.8m USB Cable 
1X 60cm SMA jumper  Cable
2X Stainless Steel Fixing Screws














MLA-30 Loop Antenna Active Receiving Antenna 100kHz-30MHz for Short Wave RadioSee detail